-
LS-600 Large Telescopic boom Concrete Laser Screed
Advantages of DYNAMIC Laser Screed，Best selling globally, stable and reliable quality, widely praised by customers. 1. High construction quality: The ground constructed by the Laser Screed machine average flatness can reach 2mm. 2. Fast construction speed: On average, 3000 square meters of ground pouring can be completed every day. 3. Reduce the amount of formwork support: the formwork consumption is only 38% of the traditional operation method. 4. High degree of automation and low labor intensity: reduce operators by 30% and reduce labor intensity at the same time. 5. High economic benefit: 30% lower cost per square meter than traditional process.
-
DUR-400 40kN vibration force Forward and backward two-way hydraulic control plate compactor
DUR-400 plate compactor is designed with double eccentric blocks, with a compaction force of 40kN, large tamping strength and good vibration effect. The ram plate is made of nodular cast iron, with an integrated casting process, high strength, crack resistance, and durability.
The directional control operation is completed by the hydraulic system. The high-precision hydraulic system ensures the reliability and durability of the system.
-
DFS-500 Road Construction Equipment Asphalt Floor Road Cutting Saw Machine Concrete Cutter
DYNAMIC DFS-500 cutting machine has reliable performance, strong power and is widely praised by construction personnel
1. Honda GX-390 engine is adopted, with excellent performance and simple maintenance
2. The maximum installation diameter of the saw blade is 500mm/20in, and the cutting depth is 180mm/7in
3.Ergonomics designed handle makes the operation more comfortable and speedy.
4.The unique designed water tank provides adequate water supply and perfect cooling effect, no residual water and makes the maintenance easier.
5.Special blade cover makes the assembling and disassembling more easier.
6.Folding guide wheel for accurate cutting，Adjustable cutting depth assures the cutting working more precise and efficient.
-
LS-400 Four-wheel driving Laser Screened with auger
Dynamic Laser Screed series could gractly improvev the concrete smoothness and compaction, as well as prolong the service life of concrete floor.
Widely used in modern industrial workshop, large shopping malls, warehouse and other construction of large area concrete ground1. High construction quality: The ground constructed by the Laser Screed machine average flatness can reach 2mm.
2. Fast construction speed: On average, 3000 square meters of ground pouring can be completed every day.
3. Reduce the amount of formwork support: the formwork consumption is only 38% of the traditional operation method. 4. High degree of automation and low labor intensity: reduce operators by 30% and reduce labor intensity at the same time. 5. High economic benefit: 30% lower cost per square meter than traditional process.
-
DFS-300 Walk Behind Gasoline Asphalt Road Floor Cutting Saw Concrete Cutter
Dynamic gasoline engine concrete cutter series
1. Ergonmics designed. Handle makes the operation more comfortable and speedy.
2. Special protective covering protects the engine perfectly and makes the transporatation more safely.
3. The unique designed water tank provides adequate water.
4. Special blade cover makes the assembling and disassembling more easily.
5. Folding guide wheel for accurate cutting.
6. Adjustable cutting depth assures the cutting working more precise and efficien.
-
DFS-400 Easy to Start Gasoline Engine Road Asphalt Concrete Cutting
DYNAMIC DFS-400 cutting machine has reliable performance, strong power and is widely praised by construction personnel
1. Honda GX-270 engine is adopted, with excellent performance and simple maintenance
2. The maximum installation diameter of the saw blade is 400mm/16in, and the cutting depth is 120mm/5in
3. Solid chassis materials make the center of gravity of the machine stable, and the machine moves stably and turns flexibly
4. The best water spraying device ensures the effective cooling of the saw blade
5. Height adjustable handrails to adapt to the operation habits of different people
-
TRE-85 Robin gasoline power EH-12 Tamping Rammer
Dynamic Tamping Rammer series adopts reliable Robin or Honda power, and the engine specially designed for impact rammer is stable, reliable, powerful and powerful.
The crankshaft and connecting rod in the fuselage are made precisely, with fast impact speed and high frequency. Aluminum alloy die-casting box, light weight, strong structure. Double air filter can effectively filter the air and make the engine work more efficiently. Thickened tamping plate is firm and durable.
-
QUM-78HA Hydraulic control of two 36 inch/1m diameter discs Power Trowel
DYNAMIC driving trowel has fast working speed and high construction efficiency, which can adapt to various concrete floor construction and is widely praised by customers
1. Hydraulic handle control, flexible steering and comfortable operation
2. Heavy load large gearbox, no high temperature oil leakage
3. Efficient transmission system, stable and reliable
4. Pulling wheel, convenient for moving and handling
5. Reliable blade lifting device, more stable construction
-
HZR-90 Factory production and sales of 20kN vibrating plate compactor
This flat compactor is the sales champion among one-way flat compactors. It uses Honda/Briggs Stratton 5.5 horsepower gasoline engine, and diesel engine can also be selected. The machine has a vibration force of 20 kN, which is powerful and has good vibration effect.
Optional: water tank, sprinkle water during construction on asphalt; Vibration damping pad, construction when laying floor tiles; The traveling wheel makes it easier to transfer.
Ram plate size: 590 × 500mm（23.2 × 19.6 inches), made of ductile iron, solid and durable.
-
LS -325 Walk-Behind concrete Laser Screed
The Laser Screed is used in large area concrete construction, such as the modern industrial workshop, the large market, storage, airport, the plaza, and so on. The Laser Screed can satisfy the construction requirements of large area and high planeness and levelness.
LS-325 provides a convenient, efficient and cost-effective solution to fully meet your floor construction needs. The device is quick to set up, easy to operate and very easy to use. The size and weight of the equipment itself are reasonable in design, convenient for transportation and suitable for various working conditions such as ground, floor and underground parking garage.
-
QJM-600 24 inch working plate gasoline engine edger torwel
The edger torwel can be used for the construction of various concrete floors such as walls, columns, rooms and underground garages.
It has a protective plate with rubber strips, which can work close to the wall to avoid damage to the wall. It greatly improves the working efficiency in a narrow environment.
-
QJM-800 30 inches/800mm Walk-Behind Power Trowel Optional gasoline engine and motor
QJM-800 wipe side machine is suitable for cement concrete surface lift to pulp; Around the corner, cylinder and small area with flat area.
This machine is used for them or the professional wall with light, independent rotating ring structure its diameter is slightly bigger than the knife dish homework diameter, wipe on the assignment, the rotation of the activities of the machine rings can be clingy corner or column edge, not only avoid the knife dish was scraping and ensure the finishing touch no dead Angle.
It is a powerful helper for your flooring construction.
-
QUM-80 High speed Concrete Ride-on Double disc Power Trowel
Ride-on power trowel can be used in surface finishing of concrete road, terrace, boatyard, airport and floor etc.
1. The speed is 150 revolutions per minute during construction, with high efficiency and good effect
2. Heavy load gearbox, high temperature oil leakage is not allowed
3. A variety of blade options, allowing better and faster construction
4. Honda twin cylinder gasoline engine, powerful and reliable
5. High efficiency transmission system to ensure effective output of engine
-
QUM-78 Two 1m/36 inch working faces Ride-on Power Trowel
DYNAMIC Ride-on trowel series Reliable power brand is adopted, with high horsepower and simple maintenance.
The heavy-duty turbine box and its own fan provide better heat dissipation and completely eliminate the potential oil leakage.
The high-precision chassis system makes the operation more stable and easy to operate.
-
DUR-500 428 kg CE certified diesel gasoline engine vibrating plate compactor
DUR-500 plate compactor, with a dead weight of 428 kg and a pressing capacity of 50 kN (about 5 tons), has excellent design and excellent manufacturing technology to ensure the perfect performance of the machine during operation.
Honda GX-390 engine is equipped as standard, with a power of 13 horsepower, strong power and simple maintenance. It is easy and fast to start with one button electronic ignition. There are also high-quality diesel engines to choose from. In addition, engines meeting EPA certification can be selected.
-
HZR-120 dead weight 120kg 20kN force Vibrating plate compactor
Dynamic unidirectional vibrating plate compactor series, with a dead weight of 50-120 kg and a force of 10-20 kN, has 5 models to choose from. There are also many larger hydraulic reversible two-way plate compactors to meet various construction needs.
This HZR-120 is the largest model of one-way flat compactor. It uses a 5.5 horsepower Honda GX-160 engine, as well as Briggs Stratton and diesel engines.
-
HZR-70 Plate compactor with water tank damping pad traveling wheel can be selected
The HZR-70 plate compactor is powered by Honda GX-160 engine.
The ramming capacity of 10 kilonewtons can be used in various soil, asphalt, floor tiles, gardens and other environments.
The integral base plate of nodular cast iron is solid and durable.
There are also water tank, damping pad, walking wheel and other accessories to choose from.
-
HZR-60 Loncin gasoline engine 51kg small plate compactor
Dynamic plate compactor series could be used in the narrow place of the wall, roadside, foundation structure also can be used for compaction asphalt and concrete.
HZR-60It is our lightest plate compactor with a dead weight of only 51 kg. The eccentric block vibration mode is adopted, and the vibration force reaches 10 kN. It is the best choice for foundation compaction operation after being tested by the market.
-
RRL-200 Dead weight 2 tons pressure capacity 30 kN Hydraulic Ride-on Roller
With a deadweight of 1-3 tons and a compaction capacity of 30 kN, it can effectively compact clay, asphalt and other working surfaces.
The hydraulic motor is driven by two wheels, with strong climbing ability, and can be used in various environments. The steering wheel controls the steering, which is easy and flexible to operate.
Honda GX-690V twin cylinder gasoline engine is equipped as standard, with strong power of 24 horsepower. Optional diesel engine
-
RRL-100 Honda GX-390 engine vibration hydraulic Ride On Roller
The full hydraulic roller is mainly used for the compaction and leveling of ditch foundation, road and sports ground, as well as the compaction of asphalt surface. RRL-100 has a dead weight of 1000 kg and a pressure capacity of 2 tons. The vibrating force is like a tank.
1. The hydraulic motor is directly connected and driven, with stepless speed change and fast forward and backward travel speed. Climbing 30 °, it can easily cope with various working conditions.
2. The hydraulic power steering has a small radius and can be easily constructed in a narrow area.
3. Honda GX-390 gasoline engine, powerful. Diesel engine is also optional.
4. One key electric start, insert the key and turn it gently.
5. The front and rear steel wheels are hinged, with superior quality.
-
DJP-70 Transmission 100m Mortar Spraying Machine
DJP-70 mortar spraying machine, with a transmission distance of more than 100 meters and a vertical height of more than 10 meters.
The 5.5kw high-frequency motor is used as the power source, with stable and reliable performance. The voltage is 380 V, and 100-400 V can be customized. In addition, gasoline and diesel engines are optional.
The material bin has a capacity of 100 liters, the maximum particle size is 6 mm, and the workload per hour is 4 cubic meters.
Flexible and convenient construction, long conveying distance, high vertical height, heavy workload, etc.
-
TRE-82 80 kg weight 16 kN impact Tamping Rammer
TRE-82 gasoline powered impact tamper has beautiful appearance, reasonable design and excellent manufacture. It is powered by Robin EH-12 engine specially developed for impact tamper, with large impact force and high frequency.
It is mainly used for the compaction of sand, crushed stone, trinity soil, sandy soil, asphalt macadam, concrete and clay. It can be widely applied to the construction of subgrade, bridge, reservoir dam, wall, various ditches and other narrow areas of highways and railways.
