The Trial Run Process Of The Four-Wheel Laser Screed Machine

The four-wheel laser leveling machine can correct and level the curved materials to improve the appearance and exquisiteness of the product. Before the formal use, the test run must be carried out. The operator must first be familiar with the test run process of the equipment before proceeding. Operation, today I will give you a specific introduction to the test run process of the next four-wheel laser leveling machine.

1. First of all, clean up the oil stains on the surface of the four-wheel laser leveling machine parts, and check whether all the connecting parts are reliable and firm. For the parts that need lubrication, add oil to see if the electrical system is well connected, the position of the limit switch is correct, for the lifting motor, see if its transmission is flexible, whether the parking is accurate, and whether the sound is correct Wait for normal operation, and then carry out load test after passing the empty test run.

2. Adjust the position of the frame and the correct position of the guide rod. Do not use a four-wheel laser leveler to correct side bends. Turn on the power, turn on the equipment, and run dry, check whether the running sound of each transmission component is normal, whether there is any jamming or overheating. If these are normal, then it can be operated with load.

3. Start the drive roller and transport the I-shaped steel to the four-wheel laser leveler. Its end should exceed the four-wheel laser leveler, and then press down the upper and lower rollers. There may be errors in the amount of reduction. It must be adjusted in time, and the deformation of pressing should not exceed one millimeter. When adjusting the upper pressing roller, stop and operate.

When the four-wheel laser leveling machine is commissioned, you can follow the above process. In addition, if you need to adjust the correction amount, you must return the workpiece to the host before adjusting the pressing amount of the correction stick. Be careful not to correct overdose. The trial run process is essential, so as to ensure the safety of use.