• 8d14d284
  • 86179e10
  • 6198046e

News

How To Debug The Hand-Supported Laser Leveling Machine

The walk-behind laser leveling machine is often used in construction engineering, mainly for vibrating, compacting, and leveling work. It has the advantage of completing the compaction and leveling of the ground at one time, but the laser leveling machine is used There will be frequent failures in the process, which will affect the smooth progress of the project, so how to debug the laser leveler, the following is the method of frequent debugging after the walk-behind laser leveler fails.

If you want to know how to debug the laser leveling machine, you must first know what the working principle of the laser leveling machine is. In fact, the laser leveling machine only has three functions: leveling, vibrating, and scraping the concrete road surface. section. In construction projects, workers will put concrete on the finished formwork, and then use a crane or a leveler to walk on the road. The machine will walk along the track, so that walking back and forth will make the road smooth. , The last step is to use a walk-behind laser leveler, mainly used to vibrate and lift the pavement; the last step is to use a roller, mainly for paving and leveling the road.

The debugging method of the walk-behind laser leveling machine:
1. The machine will continue to stamp after it is started. At this time, the direction of rotation of the machine is clockwise. If you want the speed of the feeder, you need to change the screw. At this time, the speed will be reduced. Spacers and length fine-tuning screws.
2. If you want to see if the machine is running normally, you only need to power on the machine so that you can know whether the feeding direction is correct.
3. If the speed of the walk-behind laser leveler does not change when it is running, you need to observe the feeding distance. If the distance becomes shorter, we only need to adjust the screw upwards, which will reduce the amount of time when the floating rod is lowered. For the distance, adjust the screw to control the feeding speed, so that the feeding can match the working speed of the punching machine.
4. Adjust the distance between the material rack and laser leveler and the feeder. According to the speed of the punch and the length of the feeder, adjust the distance appropriately. The leveled material should be able to enter the feeder and mold smoothly.
In summary, everyone should know how to debug the hand-supported laser leveling machine. The laser leveling machine plays an important role. If you want to know more about the laser leveling machine, welcome to consult!


Post time: Apr-09-2021